Home > PLUMBING > ROUGH PLUMBING SUPPLIES > SOLVENTS & SEALERS > PIPE CEMENTS
Sort By:
Page of 1
CEMENT ABS YELLOW 118ML CEMENT SOLVENT ABS 118ML CEMENT WET/DRY GREY 118ML
Oatey Pipe Cement, Net Content: 118 mL, Liquid, Yellow, Compositions: Methyl Ethyl Ketone, ABS Resin, Acetone, Specific Gravity: 0.88, Flash Point: 14 to 23 deg F, VOC Content: <325 g/L, Boiling Point: 151 deg F, Temperature Rating: 40 to 110 deg F, Applicable Materials: ABS Medium-bodied yellow colored cement for ABS pipe and fittings. Up to 6 in Dia. For all types and grades of ABS pipe and fittings for DWV. Low-VOC, for all non-pressure applications. Meets ASTM D2235. Medium-bodied gray colored cement for PVC pipe and fittings. Up to 6 in Dia. Fast-setting cement formulated for wet conditions and/or quick pressurization and fast installation. Recommended for all grades and types of PVC pipe and fittings, potable water and DWV. Low-VOC solvent cement meets SCAQMD 1168/316A or BAAQMD Method 40 and various environmental requirements. Both SCH 40 and 80. Pool/Irrigation. Recommended application temperature 40 to 110 deg F/4 to 43 deg C. No primer needed on non-pressure DWV, up to 4 in where local codes permit. Meets ASTM D 2564.
CEMENT PVC CLEAR 118ML CEMENT 1-STEP GREY 118ML CEMENT PVC GREY 118ML
Oatey Pipe Cement, Net Content: 118 mL, Liquid, Clear, Compositions: Tetrahydro Furan, Acetone, Methyl Ethyl Ketone, Chloro Homopolymer Ethene, Polyvinyl Chloride, Cyclohexanone, Fumed Silica, Viscosity: 1200 to 2500 cPs, VOC Content: <510 g/L, Flash Point: 14 to 23 deg F, Boiling Point: 151 deg F, Temperature Rating: 40 to 110 deg F, Density: 2.5, Applicable Materials: PVC For all non-pressure PVC DWV piping system up to 6" diameter.  One-step - no primer required.  Reduces time and money.  CSA approved.  Reduced installation time. Oatey Cement, Net Content: 118 mL, Liquid, Gray, Compositions: Tetrahydro- Furan, Acetone, Methyl Ethyl Ketone, Polyvinyl Chloride, Cyclohexanone, Fumed Silica, Viscosity: 1200 to 2500 cPs, VOC Content: <510 g/L, Flash Point: 14 to 23 deg F, Boiling Point: 151 deg F, Temperature Rating: 40 to 110 deg F, Density: 2.5, Applicable Materials: PVC, Curing Time: 2 hr
TRANSITION CEMENT 118ML CEMENT ABS YELLOW 236ML CEMENT ALL-PRPS MLKY-CLR 118ML
Oatey Transition Cement, Net Content: 118 mL, Liquid, Odor/Scent: Solvent, White, Compositions: Tetrahydro- Furan, Acetone, Methyl Ethyl Ketone, Polyvinyl Chloride, Cyclohexanone, Amorphous Fumed Silica, Specific Gravity: 2.5, Boiling Point: 151 deg F, Flash Point: 14 to 23 deg F, VOC Content: <510 g/L, Viscosity: 1000 to 2100 cPs, Temperature Rating: 40 to 110 deg F, Applicable Materials: ABS, PVC Oatey Solvent Cement, Standard Oatey Pipe Cement, Net Content: 118 mL, Liquid, Clear, Compositions: Tetrahydro- Furan, Acetone, Cyclohexanone, Methyl Ethyl Ketone, Polyvinyl Chloride, Chloro-homopolymer Chlorinated Ethene, Amorphous Fumed Silica,, VOC Content: <325 g/L, Flash Point: 14 to 23 deg F, Boiling Point: 151 deg F, Temperature Rating: 40 to 110 deg F, Density: 2.5, Applicable Materials: ABS, CPVC, PVC
CEMENT PVC GREY 236ML CEMENT CPVC CLEAR 118ML CEMENT ALL-PRPS MLKY-CLR 236ML
Oatey Cement, Net Content: 236 mL, Liquid, Gray, Compositions: Tetrahydro- Furan, Acetone, Methyl Ethyl Ketone, Polyvinyl Chloride, Cyclohexanone, Fumed Silica, Viscosity: 1200 to 2500 cPs, VOC Content: <510 g/L, Flash Point: 14 to 23 deg F, Boiling Point: 151 deg F, Temperature Rating: 40 to 110 deg F, Density: 2.5, Applicable Materials: PVC, Curing Time: 2 hr Oatey Solvent Cement, Net Content: 118 mL, Liquid, Clear, Compositions: Tetrahydro- Furan, Chloro- Homopolymer Chlorinated Ethene, Methyl Ethyl Ketone, Acetone, Cyclohexanone, Viscosity: 500 to 1500 cPs, VOC Content: <490 g/L, Flash Point: 14 to 23 deg F, Boiling Point: 151 deg F, Temperature Rating: 40 to 110 deg F, Density: 2.5 Medium-bodied, milky-clear cement for use on all schedules and classes of ABS, PVC and CPVC pipe and fittings up to 6 in Dia with interference fit.
CEMENT SOLVENT ABS 236ML CEMENT WET/DRY GREY 236ML CEMENT PVC CLEAR 236ML
Medium-bodied yellow colored cement for ABS pipe and fittings. Up to 6 in Dia. For all types and grades of ABS pipe and fittings for DWV. Low-VOC, for all non-pressure applications. Meets ASTM D2235. Medium-bodied gray colored cement for PVC pipe and fittings. Up to 6 in Dia. Fast-setting cement formulated for wet conditions and/or quick pressurization and fast installation. Recommended for all grades and types of PVC pipe and fittings, potable water and DWV. Low-VOC solvent cement meets SCAQMD 1168/316A or BAAQMD Method 40 and various environmental requirements. Both SCH 40 and 80. Pool/Irrigation. Recommended application temperature 40 to 110 deg F/4 to 43 deg C. No primer needed on non-pressure DWV, up to 4 in where local codes permit. Meets ASTM D 2564. Oatey Pipe Cement, Net Content: 237 mL, Liquid, Clear, Compositions: Tetrahydro Furan, Acetone, Methyl Ethyl Ketone, Chloro Homopolymer Ethene, Polyvinyl Chloride, Cyclohexanone, Fumed Silica, Viscosity: 1200 to 2500 cPs, VOC Content: <510 g/L, Flash Point: 14 to 23 deg F, Boiling Point: 151 deg F, Temperature Rating: 40 to 110 deg F, Density: 2.5, Applicable Materials: PVC
CEMENT 1-STEP GREY 236ML CEM CPVC 236ML CLR CEMENT TRNSTN WH PVC-ABS 236ML
For all non-pressure PVC DWV piping system up to 6" diameter.  One-step - no primer required.  Reduces time and money.  CSA approved.  Reduced installation time. Oatey Pipe Cement, Net Content: 236 mL, Liquid, Clear, Compositions: Furan, Tetrahydro, Ethene, Chloro, Homopolymer, Chlorinated, Methyl Ethyl Ketone, Acetone, Cyclohexanone, Viscosity: 500 to 1500 cPs, VOC Content: 490 g/L, Flash Point: 14 to 23 deg F, Boiling Point: 151 deg F, Density: 0.95 Oatey Transition Cement, Net Content: 236 mL, Liquid, Odor/Scent: Solvent, White, Compositions: Tetrahydro- Furan, Acetone, Methyl Ethyl Ketone, Polyvinyl Chloride, Cyclohexanone, Amorphous Fumed Silica, Specific Gravity: 2.5, Boiling Point: 151 deg F, Flash Point: 14 to 23 deg F, VOC Content: <510 g/L, Viscosity: 1000 to 2100 cPs, Temperature Rating: 40 to 110 deg F, Applicable Materials: ABS, PVC
CEMENT ABS YELLOW 473ML CEMENT PVC GREY 473ML CEMENT WET/DRY GREY 473ML
Oatey Pipe Cement, Net Content: 473 mL, Liquid, Yellow, Compositions: Methyl Ethyl Ketone, ABS Resin, Acetone, Specific Gravity: 0.88, Flash Point: 14 to 23 deg F, VOC Content: <325 g/L, Boiling Point: 151 deg F, Temperature Rating: 40 to 110 deg F, Applicable Materials: ABS Oatey Cement, Net Content: 473 mL, Liquid, Gray, Compositions: Tetrahydro- Furan, Acetone, Methyl Ethyl Ketone, Polyvinyl Chloride, Cyclohexanone, Fumed Silica, Viscosity: 1200 to 2500 cPs, VOC Content: <510 g/L, Flash Point: 14 to 23 deg F, Boiling Point: 151 deg F, Temperature Rating: 40 to 110 deg F, Density: 2.5, Applicable Materials: PVC, Curing Time: 2 hr Medium bodied gray colored cement for PVC pipe and fittings. Up to 6 in Dia. Fast-setting cement formulated for wet conditions and quick pressurization and fast installation. Recommended for all grades and types of PVC pipe and fittings, potable water and DWV. Low VOC solvent cement meets SCAQMD 1168/316A or BAAQMD Method 40 and various environmental requirements. Both SCH 40 and 80. Pool/Irrigation. Recommended application temperature 40 to 110 deg F/4 to 43 deg C. No primer needed on non-pressure DWV, up to 4 in where local codes permit. Meets ASTM D 2564.
ADHSV BNDG F/SHWR PAN LNR 16OZ CEMENT ABS TO PVC 473ML CEMENT ABS YELLOW 946ML
Oatey 48915 Cement
Our Price: $22.99
Oatey Cement, Net Content: 16 fl-oz, Can, Applicable Materials: PVC Oatey Cement Oatey Pipe Cement, Net Content: 946 mL, Liquid, Yellow, Compositions: Methyl Ethyl Ketone, ABS Resin, Acetone, Specific Gravity: 0.88, Flash Point: 14 to 23 deg F, VOC Content: <325 g/L, Boiling Point: 151 deg F, Temperature Rating: 40 to 110 deg F, Applicable Materials: ABS
CEMENT PVC GREY 946ML CEMENT 1-STEP GREY 946ML CEMENT PVC MED-GRAY 3.78L
Oatey Pipe Cement For all non-pressure PVC DWV piping system up to 6" diameter.  One-step - no primer required.  Reduces time and money.  CSA approved.  Reduced installation time. Oatey Cement, Net Content: 3.78 L, Liquid, Gray, Odor/Scent: Solvent, Compositions: Furan, Tetrahydro, Acetone, Methyl Ethyl Ketone, Polyvinyl Chloride, Cyclohexanone, Fumed Silica, Viscosity: 1200 to 2500 cP, VOC Content: <510 g/L, Flash Point: 14 to 23 deg F, Boiling Point: 151 deg F, Temperature Rating: 40 to 110 deg F, Density: 7.7 lb/gal, Specific Gravity: 0.93, Applicable Materials: PVC