Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE REPAIR > TEST CAPS & PLUGS
Sort By:
Page of 1
TEST CAP 1-1/2IN ABS          TEST CAP 2IN ABS              TEST CAP 3IN ABS
Oatey? introduces our new line of test caps. Consisting of Knock-Out? test caps, End-Cap? test caps, Push-Cap? covers and multi-Size (MS) End-Cap? test caps, Oatey offers a complete range to meet the needs of your particular applications. Oatey Insert Test Cap, 2 in Connection, Back Pressure: 17 psi, ABS, White Oatey Knock-Out Test Cap, 3 in Connection, SPGT Connection, Schedule Rating: SCH 40, 17 psi
CAP TEST 1-1/2IN ORNG ABS     TEST CAP 4IN ABS              CAP TEST 1-1/4IN ORNG ABS
IPEX Test Cap, Hub Connection, Pipe Size: 1-1/2 in, 2.1 in OAL, 2.1 in Dia, Schedule Rating: SCH 40, ABS, Orange Oatey? introduces our new line of test caps. Consisting of Knock-Out? test caps, End-Cap? test caps, Push-Cap? covers and multi-Size (MS) End-Cap? test caps, Oatey offers a complete range to meet the needs of your particular applications. IPEX Test Cap, Hub Connection, Pipe Size: 1-1/4 in, 1.8 in OAL, 1.8 in Dia, Schedule Rating: SCH 40, ABS, Orange
CAP TEST 2IN ORNG ABS         CAP TEST 3IN ORNG ABS         CAP TEST 4IN ORNG ABS
IPEX Test Cap, Hub Connection, Pipe Size: 2 in, 2.7 in OAL, 2.7 in Dia, Schedule Rating: SCH 40, ABS, Orange IPEX Test Cap, Hub Connection, Pipe Size: 3 in, 3.7 in OAL, 3.7 in Dia, Schedule Rating: SCH 40, ABS, Orange IPEX Test Cap, Hub Connection, Pipe Size: 4 in, 4.7 in OAL, 4.7 in Dia, Schedule Rating: SCH 40, ABS, Orange
Worldwide Sourcing TC-15 Flexible Test Caps CAP TEST COMMON DRN PP 1-1/2IN TEST PLUG PLASTIC 4IN
This ProSource test cap is used for capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Fernco Drain Pipe Test Cap, Series: Plumb Qwik, Flexible, 1-1/2 in Nominal Size, Slip, 1-57/64 in Inside Dia, 2.26 in Outside Dia, 1-1/8 in Length, 4.3 psi Working, Elastomeric PVC/300 Stainless Steel Band, ASTM D5926, Black, 140 deg F, For both aboveground and underground applications Plastic mechanical plug designed to hold higher pressures. Used for plugging open ended piping as protection from dirt, dust or debris. Maximum allowed air is 5 psig.
Worldwide Sourcing TC-2 Flexible Test Caps TEST PLUG PLASTIC 1-1/2IN     CAP TEST COMMON DRN PP 2IN
This ProSource test cap is used for capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Cherne? End-of-Pipe Gripper? plugs can be used in applications including DWV (drain, waste and vent) testing and stack testing. End-of-pipe design seals only at the end of a pipe. Fernco Drain Pipe Test Cap, Series: Plumb Qwik, Flexible, 2 in Nominal Size, Slip, 2-25/64 in Inside Dia, 2.79 in Outside Dia, 1-1/8 in Length, 4.3 psi Working, Elastomeric PVC/300 Stainless Steel Band, ASTM D5926, Black, 140 deg F, For both aboveground and underground applications
Worldwide Sourcing TC-3 Flexible TestCaps TEST PLUG PLASTIC 2IN         CAP TEST COMMON DRN PP 3IN
This ProSource test cap is used for capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Cherne? End-of-Pipe Gripper? plugs can be used in applications including DWV (drain, waste and vent) testing and stack testing. End-of-pipe design seals only at the end of a pipe. Fernco Drain Pipe Test Cap, Series: Plumb Qwik, Flexible, 3 in Nominal Size, Slip, 3-33/64 in Inside Dia, 3.95 in Outside Dia, 1-1/8 in Length, 4.3 psi Working, Elastomeric PVC/300 Stainless Steel Band, ASTM D5926, Black, 140 deg F, For both aboveground and underground applications
CAP TEST COMMON DRN PP 4IN    Worldwide Sourcing TC-4 Flexible Test Caps TEST PLUG PLASTIC 3IN
Fernco Drain Pipe Test Cap, Series: Plumb Qwik, Flexible, 4 in Nominal Size, Slip, 4-33/64 in Inside Dia, 4.93 in Outside Dia, 1-1/8 in Length, 4.3 psi Working, Elastomeric PVC/300 Stainless Steel Band, ASTM D5926, Black, 140 deg F, For both aboveground and underground applications This ProSource test cap is used for capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Cherne? End-of-Pipe Gripper? plugs can be used in applications including DWV (drain, waste and vent) testing and stack testing. End-of-pipe design seals only at the end of a pipe.