Home > PAINT & SUNDRIES > SUNDRIES > TILE PRODUCTS
Choose a sub category:
TILE GROUT MORTAR CEMENT BACKERBOARD
TILE SEALERS TILE CLEANERS
Sort By:
Page of 3
MORTAR BOND SCRATCH CRMC 50LBS MORTAR 50LB GRY TL/STN Lepage 394892 Lepage - Poly Filla Tile Grout
ScratchBond 8200 is a portland-cement-based scratchcoat mortar for use with metal lath on plywood subfloors and countertops prior to setting ceramic tile and stone. A thin mortar bed for use as an underlayment providing a sound, stable surface for bonding ceramic tile over exterior-grade plywood. Wood surfaces must be interior only and protected from moisture. Polyfilla? wall tile grout is a specially formulated water and stain repellent, ready to use grouting compound for ceramic wall tiles. Recommended for both new ceramic tiling and re-grouting applications. When dry, it forms a hard, long-lasting, waterproof joint between tiles. Polyfilla? wall tile grout is siliconized and does not require a grout sealant. It comes in either a tub for larger grouting jobs and also a squeeze tube that is convenient for smaller repair jobs.
SEALER GROUT UC 237ML CLEANER GROUT/TILE 710ML CLEANER CONC GROUT/TILE 946ML
UltraCare? grout sealer is an affordable, water-based penetrating sealer that will provide protection against most common stains for sanded and non-sanded cementitious grout joints. It can also be used as a pre-grouting sealer. UltraCare everyday stone and grout cleaner and resealer is a ready-to-use, everyday spray cleaner. This product helps to boost the performance of any existing penetrating sealers while cleaning and deodorizing. Powerful enough to help dissolve grease and grime, UltraCare everyday stone and grout cleaner and resealer is ideal for kitchen and bathroom countertops. Non-acidic, it is safe to use on natural stone, grout and tile. UltraCare concentrated tile and grout cleaner is a highly concentrated neutral cleaner with a lemon scent for everyday use. When used regularly and per the directions, this biodegradable, neutral cleaner helps to maintain a variety of ceramic, porcelain and natural stone surfaces as well as grout in pristine condition. In addition, it helps to prevent soap scum build-up and hard water deposits.
CLEANER ACIDIC 946ML MORTAR 50LB GRY TL/STN PremiumPlus CPTSW50 Standard Thin?Set?Mortar
UltraCare acidic tile and grout cleaner is a highly concentrated acidic cleaner formulated to remove cement grout haze, mortar residue, mineral deposits, rust stains and efflorescence from tile, concrete and masonry surfaces. It is also effective for removing hard water stains, lime deposits and soap scum. This product contains no phosphates. Ultraflex 1 is a single-component, polymer-modified, thin-set mortar for interior and exterior installations of dimensional stone, ceramic, porcelain and quarry tile. This mortar has an above-average content of a unique dry polymer, resulting in good adhesion to the substrate and tile. Ultraflex 1 can be used for both interior and exterior installations of tile in most residential floor and wall applications. In commercial applications, use on interior floor and wall installations and exterior floors. For exterior commercial wall applications, we recommend using either the Kerabond/Keralastic? or Granirapid? systems. Ultraflex 1 meets or exceeds ANSI A118.4 and ANSI A118.11 requirements when mixed with water. High-performance non-modified mortar for most basic tile jobs. It offers premium quality and economy, covering 10 to 20% more area than other thin sets. Its extra-long working time makes it simple to apply and adjust tile. Ultra smooth and creamy, it's very easy to trowel. For increased performance, use Custom? Building Products' thin set admix concentrate or thin set mortar admix when bonding dense tiles or setting over exterior-grade plywood, existing tile and for exterior applications. Exceeds ANSI A118.1 without additives. Exceeds ANSI A118.4 and A118.11 when mixed with thin set mortar admix.
VersaBond CVBG50 Fortified Thin?Set?Mortar GROUT 493ML CLR F/FLR TL Lepage 1256124 Lepage - Poly Filla Tile Grout
A professional formula, all-purpose mortar, polymer modified to provide good bond strength for floor and tile projects. VersaBond? cures quickly even in cold climates and adheres to most surfaces, exceeding ANSI A118.4 and A118.11 without the need for additives. Do you love ceramic tile, but hate the inevitable discoloration of grout. Have you used a silicone-based grout sealer, only to find that it changes the color of your joints when you apply it. Find it too laborious to keep the sealer off the tiles to avoid a mess. Finally, do you find that no sealer you've used so far has been resistant enough. Looking for a miracle product. Surf-Pro intelligent sealer is the solution. Polyfilla? wall tile grout is a specially formulated water and stain repellent, ready to use grouting compound for ceramic wall tiles. Recommended for both new ceramic tiling and re-grouting applications. When dry, it forms a hard, long-lasting, waterproof joint between tiles. Polyfilla? wall tile grout is siliconized and does not require a grout sealant. It comes in either a tub for larger grouting jobs and also a squeeze tube that is convenient for smaller repair jobs.
MORTAR 25LB GREY F/TILE&STONE SEALER GROUT/TILE 946ML MORTAR 50LB GRY TL/STN
Ultraflex 2 is a professional-grade, single-component, high-performance, polymer-modified thin set mortar for interior and exterior installations of ceramic, porcelain and dimensional natural stone tile. This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. Ultraflex 2 meets or exceeds ANSI A118.4 and ANSI A118.11 requirements when mixed with water. Ultraflex 2 can be used for interior and exterior installations of tile in most residential floor and wall applications. In commercial applications, use on interior floor and wall installations and exterior floors. UltraCare? penetrating stone, tile and grout sealer is an economical, natural-look, water-based penetrating sealer that protects against most common stains for all interior and exterior natural stone (marble, limestone, sandstone, slate, granite, travertine and more.), unglazed ceramic tile, masonry and cement grout. The product contains silicon and can also be used as a pre-grouting sealer. Kerabond is a premium-grade, dry set mortar for use in interior/exterior residential and commercial floor and wall applications when mixed with water.
MORTAR 10LB GREY F/TILE&STONE Polyblend CPBWDG25 Non-Shrinking Tile Grout? SpeedSet CSDS25 Fortified Thin?Set?Mortar
Ultraflex 2 is a professional-grade, single-component, high-performance, polymer-modified thin set mortar for interior and exterior installations of ceramic, porcelain and dimensional natural stone tile. This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. Ultraflex 2 meets or exceeds ANSI A118.4 and ANSI A118.11 requirements when mixed with water. Ultraflex 2 can be used for interior and exterior installations of tile in most residential floor and wall applications. In commercial applications, use on interior floor and wall installations and exterior floors. Polymer-modified, non-sanded Portland cement dry grout used for joints up to 1/8 in (3 mm) wide. Excellent for highly-glazed ceramic tile or highly-polished marble or natural stone that can be scratched by sanded grouts. Its non-shrinking and durable. Polymer-modified for strength, just add water. A quick-setting, polymer-modified mortar, SpeedSet is excellent for commercial use and cold temperature installations, as well as small residential jobs and repairs. Its quick curing properties allow for grouting in as little as 3 hrs and light traffic in 4 hrs.
MORTAR TILE THINSET GREY 50LB MORTAR 50LB GREY F/TILE&STONE MORTAR TL/STN 25LB DK GRY
Mapei Premium large-format tile mortar with polymer. Ultraflex LFT is a premium non-sag medium-bed and thin-set mortar for large-format tile and stone for interior/exterior floor, wall and counter top installations. This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. Ultraflex 2 is a professional-grade, single-component, high-performance, polymer-modified thin set mortar for interior and exterior installations of ceramic, porcelain and dimensional natural stone tile. This mortar has a high content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. Ultraflex 2 meets or exceeds ANSI A118.4 and ANSI A118.11 requirements when mixed with water. Ultraflex 2 can be used for interior and exterior installations of tile in most residential floor and wall applications. In commercial applications, use on interior floor and wall installations and exterior floors. Ultraflex RS is a premium-grade, single-component, high-performance, polymer-modified, rapid-setting thin set mortar for interior and exterior installations of tile. This mortar has a high-content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. Ultraflex RS is a FastTrack Ready? product, allowing grouting in 2 to 3 hr. It can be used for both interior and exterior installations of tile in most residential floor and wall applications. In commercial applications, use on interior floor and wall installations and exterior floors. Thanks to MAPE's High-Hydrated Cement Technology (HCT?), Ultraflex RS offers great drying-out characteristics for quick curing and does not contribute to efflorescence.
SEALER 473ML CLEAR F/TILE FLR MORTAR 50LB GRY TL/STN FlexBond CFB50 Crack?Prevention?Mortar
Provides unsurpassed invisible protection for marble, stone, porcelain, quarry and Saltillo tile, grout, concrete and masonry. This long-lasting, water-based sealer actually repels dirt, oil and stains allowing for easy cleanup. Use when maximum protection is required such as in food preparation areas, floors and other high traffic areas. Can also be used in place of a grout release prior to grouting to prevent grout staining and facilitate grout cleanup. Low-odor, pH neutral and nonabrasive. Allows moisture vapor transmission. For interior and exterior use. Ker 121 is a professional-grade, single-component, high-performance mortar for the installation of ceramic, marble, granite and porcelain stoneware over most traditional and specialty substrates. Ker 121 can be used for most interior residential floor and wall tile applications. In commercial applications, use on interior floor and wall installations as well as exterior floors. A premium-quality, polymer-modified mortar with exceptional flexibility and bond strength for tiling difficult surfaces, such as plywood, vinyl and laminates and for hard to bond, nonporous tile, such as porcelain and glass.
MORTAR 50LB GRY TL/STN GROUT ACRYLIC EGG NO 00 .5GAL GROUT ACRY WARMGREY NO93 .5GAL
Mapecem Premix is a fast-setting, premixed cement-based mortar for concrete repairs and subfloor preparation work. Mixed exclusively with water, Mapecem Premix provides an easy-to-use, high-compressive-strength, fast-setting mortar that sets completely within 24 hr without shrinkage cracks. Thanks to Mapei's High-Hydrated Cement Technology (HCT?), Mapecem Premix offers great drying-out characteristics for quick curing and does not contribute to efflorescence. When properly used, Mapecem Premix will allow installation of ceramic tile and natural-stone flooring after only 3 to 4 hr and installation of floor covering after 16 to 18 hr. MAPEI Flexcolor CQ is a professional-grade, ready-to-use specialty grout for precision commercial and residential installations with porcelain, ceramic and natural-stone tiles. MAPEI Flexcolor CQ can be used to grout interior/exterior tile, and its dense composition helps to prevent water-based stains by providing water repellency to the grout surface. MAPEI Flexcolor CQ is formulated with the latest innovation in quartz aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation of the low level of water in the formulation. Comparison testing of MAPEI Flexcolor CQ versus traditional Portland-cement grout has verified that MAPEI Flexcolor CQ is 30% more cost-efficient (based on typical rates of installers) and requires 65% less time to install. Mapei Flexcolor? CQ is a professional-grade, ready-to-use specialty grout for precision commercial and residential installations with porcelain, ceramic and natural-stone tiles. Mapei Flexcolor? CQ can be used to grout interior/exterior tile and its non-porous composition helps to prevent water-based stains by providing water repellency to the grout surface. Mapei Flexcolor? CQ is formulated with the latest innovation in quartz aggregate, which ensures color consistency, ease of cleanability and improved workability. In addition, this grout can be used on sensitive tile surfaces once tested, requires no sealer and cures naturally from evaporation of the low level of water in the formulation.
MORTAR TL/STN 50LB DK GRY MORTAR 25LB LT GRY TL/STN GROUT 3.78L NO180 SNDSTN
Ultraflex RS is a premium-grade, single-component, high-performance, polymer-modified, rapid-setting thin set mortar for interior and exterior installations of tile. This mortar has a high-content of unique dry polymer, resulting in excellent adhesion to the substrate and tile. Ultraflex RS is a FastTrack Ready? product, allowing grouting in 2 to 3 hr. It can be used for both interior and exterior installations of tile in most residential floor and wall applications. In commercial applications, use on interior floor and wall installations and exterior floors. Thanks to MAPE's High-Hydrated Cement Technology (HCT?), Ultraflex RS offers great drying-out characteristics for quick curing and does not contribute to efflorescence. Ultralite mortar is a premium-grade, lightweight single-component thin set mortar that can also be used for medium bed and non-sag applications. This high-performance, polymer-modified mortar is formulated with easy glide technology? for ease of application and with BioBlock? technology for mold and mildew resistance. Ultralite Mortar's unique Ultralite technology? provides twice the coverage of a standard thin set mortar and contributes to LEED points with over 20% recycled content. The no-mix, no-mess alternative to traditional grout. This sanded, shrink and crack-resistant formula is also resistant to common household stains. SimpleGrout? pre-mixed grout is easy to use and ideal for grout restoration.