Home > PAINT & SUNDRIES > SUNDRIES > LADDERS
Choose a sub category:
STEP - ALUMINUM STEP - FIBERGLASS UTILITY/FOLDING STEP STOOLS
STRAIGHT LADDERS EXTENSION - ALUMINUM EXTENSION - FIBERGLASS
PLATFORM LADDERS-FIBERGLASS COMBINATION/ MULTI LADDERS LADDER ACCESSORIES
Sort By:
Page of 4
SPRING CLIP GREY 3IN          LOCK PIG TAIL                 LOCK ARM SCAFFOLD 13IN
Made of corrosion-resistant stainless steel. Can be used for both standard mason and walk-through (arch) scaffold frames. Used to hold METALTECH coupling pin on scaffolding frame. Meets ANSI, CSA and OSHA standards. For a hole 1/2 in. For exterior scaffolding. Meets ANSI, CSA and OSHA standards. 1-1/2 in x 3 in. Use to lock when stacking frames. Use with standard or arched scaffold frames. Distance between the bolt holes are 13 in. Blue powder-coat for corrosion protection. Meets ANSI, CSA and OSHA standards. Weather resistant.
PIN COUPLING W/COLLAR 1IN     STOOL STEP WHITE UTILITY 300LB BRACKET RF ORG STL 50DG 2X10IN
Replacement coupling pin with 1 in. collar includes locking spring. Rugged steel construction ensures lasting durability. Use with standard or arched scaffold frames. Serves as connector when stacking mason and arch scaffold frames. Tapered end allows for easy stacking. Weather resistant for lasting use. This pin is acceptable for both 1.69 in. and 1-5/8 in. tube OD frames. Meets OSHA standards for safety. The Rubbermaid step stool is great to have when something is just out of reach. It has an attractive, skid-resistant texture on its surface and four skid-resistant feet to ensure safety. This roof bracket is perfect for those who need to install or repair a sloped roof (14/12). It provides you with all the safety you need so that you can move freely and confidently around the roof. Easy installation ensures attaching the brackets to the rafters and place a plank on them. Its steel covered in a baked powder coating structure ensures durability and does not damage the roofing.
BUMPER LADDER EXTNSN PROTECTVE GUARDRAIL 5FT                 GUARDRAIL 7FT
Louisville Ladder Mitt, Suitable for: Fiberglass and Aluminum Extension and Single Ladders Meets ANSI, CSA and OSHA standards. Meets ANSI, CSA and OSHA standards.
BRACKET ROOF ADJ 3 POSITIONS  Simple Spaces WK-2062A Folding Step Stools Prosource YH-CS001 Casters
Essential for those who install or repair rooves with a steep slope (2/12 to 24/12). This bracket provides all the safety necessary so that you can move freely and confidently around the roof. Easy installation: Adjust it, attach it to the rafters and to place a plank on it. Its steel covered in a baked powder-coating structure ensures durability and does not damage the shingles. Used with planed planks (1-1/2 in x 9-1/2 in) or rough planks (2 in x 10 in). Bolts with locknuts, reinforcement angle and exclusive bar. Simple Spaces Folding Type 3 Step Stool, 225 lb Weight, 2 Steps, 15 in Step Width, 5-1/8 in Step Depth, Step Spacing: 7-3/4 in, Step Tread Type: Non-Slip PP Tread, Base Spread Size: 20 in, Steel, Hammertone Powder Coated, Gray, 19-1/4 in Width, 38-1/2 in Height, 20 in Depth The casters can swivel and rotate 360 degrees, which makes moving and turning the scaffold easy. Smooth and quiet operation. Perfect for industrial applications, such as warehousing, delivery, medical devices, factories, and so on.
BRACE SCAFFOLD CROSS 7X4FTX1IN BRACE SCAFFOLD CROSS 4X10FT   TRAY BAKER TOOL
Designed for scaffold frames that have 4 ft. locking pin spacing. Cross brace must be installed on each leg of a frame or arch frame to reach its full load capacity. Works with both standard and arched scaffold frames for versatile use. Durable construction with 1 in OD galvanized steel tube, 16 ga Weather Resistant. ANSI Specified. CSA Certified. OSHA Approved. METALTECH Cross Brace, Specifications: 14.2 lb Weight, Galvanized, Dimensions: 10 ft W x 4 ft H For use with I-CISC, I-CISCTP, I-CISCPY, I-CAISC and I-IRC scaffolds. Black polypropylene. 30-1/4 x 20 x 2-3/4 in.
STOOL 2-STP FOLDABLE WHT 18IN GUARDRAIL POST W/WEDGE CLAMP  Simple Spaces WK-2063A Folding Step Stools
This step stool is easy to set up or fold down for convenient and lightweight carrying and enhanced mobility. Its slim width when folded takes up minimal storage space. It stands upright on its own when folded. The stool has four skid-resistant foot pads and is resistant to rust and dents. Meets ANSI, CSA and OSHA standards. Hammertone coated finish. Sturdy tubular steel frame. Non-slip step surface. Folds for easy storage. Lightweight and easy to carry. Highest standing 27-1/2 in. Step size 15 in L x 10 in W, Open size 50-3/4 in H x 19-1/4 in W x 25 in D, Closed size 55-1/4 in H x 19-1/4 in W x 3 in D.
BRACKET SIDE 20IN             STAND OFF ARMS ALUM           M-MBSJP24 SCREW JACK 24IN ADJU
Meets ANSI, CSA and OSHA standards. Louisville Ladder Stabilizer, Specifications: 15 x 25 in Span, Aluminum METALTECH Levelling Jack, Galvanized, Dimensions: 24 in
LADDER STEP ALUM TYPE 3 4 FT  LADDER STP AL TYP1A 300LB 2FT BRACKET SIDE 30IN
Louisville Step Ladder, Duty Rating: Type 3, 225 lb Weight, Open Width: 18-3/4 in, Closed Height: 4 ft, Aluminum This Louisville 2 ft aluminum step stool has a load capacity of 300 lb, rated ANSI Type IA. This ladder is equipped with a wide top, pinch-resistant spreader braces, heavy-duty gusset bracing and angled aluminum slip-resistant rubber feet. The Louisville AS3002 step stool meets or exceeds the safety standards set by ANSI, CSA and OSHA. Meets ANSI, CSA and OSHA standards.
LADDER STEP AL TYP2 225LB 4FT LADDER STEP AL TYP2 225LB 6FT LADDER STEP AL W/TRAY T2 6FT
This Louisville 4 ft lightweight aluminum step ladder has a load capacity of 225 lb, rated ANSI Type II. This ladder is equipped with a molded top with handyman's tool slots, molded pail shelf, slip-resistant rubber feet, steel gusset bracing and pinch-resistant spreader braces. This ladder is ideal for painting. The Louisville AS4004 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA. This Louisville 6 ft lightweight aluminum step ladder has a load capacity of 225 lb, rated ANSI Type II. This ladder is equipped with a molded top with handyman's tool slots, molded pail shelf, slip-resistant rubber feet, steel gusset bracing and pinch-resistant spreader braces. This ladder is ideal for painting. The Louisville AS4006 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA. Louisville Step Ladder, Duty Rating: Type 2, Open Width: 23-1/2 in, Closed Height: 6 ft, Aluminum, Includes: Pail Tray
LADDER STEP ALUM TYPE 3 6 FT  LADDER STEP FBRGLS TYPE1 4FT  Prosource YH-TR001-2 Outrigger
Louisville Step Ladder, Duty Rating: Type 3, 225 lb Weight, Open Width: 20-1/2 in, Closed Height: 6 ft, Aluminum This Louisville 4 ft non-conductive fiberglass step ladder has a load capacity of 250 lb, rated ANSI Type I. This ladder is equipped with the innovative ProTop? with magnet and multiple tool slots, SHOX impact absorption system, slip-resistant rubber boot, pinch-resistant spreader braces, wide back braces and double-rivet step construction. The Louisville FS2004 step ladder meets or exceeds the safety standards set by ANSI, CSA and OSHA. This multi-use scaffolding unit can provide additional stability and extend the width of the scaffold base, giving you options to enhance your safety.