Home > PAINT & SUNDRIES > SUNDRIES > ABRASIVES - NON POWER > SANDING SPONGES
Sort By:
Page of 3
SPNG SNDG 1-SIDE 150G 3X4X.5IN SPONGE SNDPPR 4X2-3/4X1IN SPONGE SNDPPR 4X2-3/4X1IN
Specialty sponges are a cost-effective solution for sanding hard to reach surfaces on a variety of materials. Offered in various styles and grits for general-purpose sanding on a variety of materials. Offered in various styles and grits for general-purpose sanding on a variety of materials.
SPONGE SANDING FINE/MEDIUM SPONGE SANDING MED/MEDIUM ProSource 151303L Drywall Sanding Sponges
Offered in various styles and grits for general-purpose sanding on a variety of materials. Offered in various styles and grits for general-purpose sanding on a variety of materials. This Vulcan drywall sanding sponge is ideal for sanding drywall and plaster during spot repair. Fine and medium sanding grits on one sponge. Use for flat or contoured surfaces, wet or dry sanding. The two sanding grades on one sponge in a fine/medium combination. Sponge can be rinsed and reused.
SPONGE SNDPPR 4X2-3/4X1IN BLCK SPONGE SANDG WET/DRY FINE/MED SAND/SPONGE WET/DRY MED/COURSE
Richard Sanding Sponge, 4 in Length, 2-3/4 in Width, Coarse, Medium Grit Grade, Applicable Materials: Drywall, Fiberglass, Metal, Wood 3M Sanding Sponge, 3-3/4 in Length, 2-5/8 in Width, 1 in Thickness, 60, 100 Grit, Fine, Medium Grit Grade, Aluminum Oxide Abrasive, Applicable Materials: Drywall, Metal, Plastic, Wood 3M Small area sanding sponge is for either dry or wet sanding. Ideal for sanding wood, paint, metal, plastic and drywall. Two sanding grades on one sponge in a combination of extra fine/fine, fine/medium or medium/coarse. Rinse and reuse.
SPONGE SNDPPR 4X2-3/4X1IN BLCK SPONGE SANDING DUAL ANG 80GRIT SPONGE SANDING DUAL ANG 120GRT
Richard Sanding Sponge, 4 in Length, 2-3/4 in Width, Fine, Medium Grit Grade, Applicable Materials: Drywall, Fiberglass, Metal, Wood
SPONGE SAND MULTI ANGLE 120G SPNG SNDG 1ANG 80G 4.5X3.5X1IN SPONGE SAND MULTI ANGLE 80G
Our super sharp abrasive and new coating method make these sponges resist clogging, cut faster and last longer than general sanding sponges and up to 5X longer than conventional and paper. The various sizes and grit combinations offer maximum versatility and flexibility for sanding curved, contoured or flat surfaces of wood, metal, paint, plastic and drywall. Our super sharp abrasive and new coating method make these sponges resist clogging, cut faster and last longer than general sanding sponges and up to 5X longer than conventional and paper. The various sizes and grit combinations offer maximum versatility and flexibility for sanding curved, contoured or flat surfaces of wood, metal, paint, plastic and drywall. Our super sharp abrasive and new coating method make these sponges resist clogging, cut faster and last longer than general sanding sponges and up to 5X longer than conventional and paper. The various sizes and grit combinations offer maximum versatility and flexibility for sanding curved, contoured or flat surfaces of wood, metal, paint, plastic and drywall.
SPNG SND 1ANG 120G 4.5X3.5X1IN SPONGE SAND CONTOUR 120GRIT SPONGE SAND CONTOUR 180GRIT
Our super sharp abrasive and new coating method make these sponges resist clogging, cut faster and last longer than general sanding sponges and up to 5X longer than conventional and paper. The various sizes and grit combinations offer maximum versatility and flexibility for sanding curved, contoured or flat surfaces of wood, metal, paint, plastic and drywall. Our super sharp abrasive and new coating method make these sponges resist clogging, cut faster and last longer than general sanding sponges and up to 5X longer than conventional and paper. The various sizes and grit combinations offer maximum versatility and flexibility for sanding curved, contoured or flat surfaces of wood, metal, paint, plastic and drywall. Our super sharp abrasive and new coating method make these sponges resist clogging, cut faster and last longer than general sanding sponges and up to 5X longer than conventional and paper. The various sizes and grit combinations offer maximum versatility and flexibility for sanding curved, contoured or flat surfaces of wood, metal, paint, plastic and drywall.
SPONGE SAND CONTOUR 220GRIT SPONGE SNDG 60G 4.5X2-11/16IN SPONGE SNDG 120G 4.5X2-11/16IN
Our super sharp abrasive and new coating method make these sponges resist clogging, cut faster and last longer than general sanding sponges and up to 5X longer than conventional and paper. The various sizes and grit combinations offer maximum versatility and flexibility for sanding curved, contoured or flat surfaces of wood, metal, paint, plastic and drywall. Our super sharp abrasive and new coating method make these sponges resist clogging, cut faster and last longer than general sanding sponges and up to 5X longer than conventional and paper. The various sizes and grit combinations offer maximum versatility and flexibility for sanding curved, contoured or flat surfaces of wood, metal, paint, plastic and drywall. Our super sharp abrasive and new coating method make these sponges resist clogging, cut faster and last longer than general sanding sponges and up to 5X longer than conventional and paper. The various sizes and grit combinations offer maximum versatility and flexibility for sanding curved, contoured or flat surfaces of wood, metal, paint, plastic and drywall.
SPONGE SNDG 36G 4.5X2-11/16IN SPONGE SAND CONTOUR 36GRIT SPONGE SNDG 220G 4.5X2-11/16IN
Our super sharp abrasive and new coating method make these sponges resist clogging, cut faster and last longer than general sanding sponges and up to 5X longer than conventional and paper. The various sizes and grit combinations offer maximum versatility and flexibility for sanding curved, contoured or flat surfaces of wood, metal, paint, plastic and drywall. Our super sharp abrasive and new coating method make these sponges resist clogging, cut faster and last longer than general sanding sponges and up to 5X longer than conventional and paper. The various sizes and grit combinations offer maximum versatility and flexibility for sanding curved, contoured or flat surfaces of wood, metal, paint, plastic and drywall. Our super sharp abrasive and new coating method make these sponges resist clogging, cut faster and last longer than general sanding sponges and up to 5X longer than conventional and paper. The various sizes and grit combinations offer maximum versatility and flexibility for sanding curved, contoured or flat surfaces of wood, metal, paint, plastic and drywall.
SPONGE SNDG 180G 4.5X2-11/16IN SPONGE SAND CONTOUR 60GRIT SPONGE SANDING ANGLED FINE
Our super sharp abrasive and new coating method make these sponges resist clogging, cut faster and last longer than general sanding sponges and up to 5X longer than conventional and paper. The various sizes and grit combinations offer maximum versatility and flexibility for sanding curved, contoured or flat surfaces of wood, metal, paint, plastic and drywall. Our super sharp abrasive and new coating method make these sponges resist clogging, cut faster and last longer than general sanding sponges and up to 5X longer than conventional and paper. The various sizes and grit combinations offer maximum versatility and flexibility for sanding curved, contoured or flat surfaces of wood, metal, paint, plastic and drywall. Offered in various styles and grits for sanding of paint and drywall.
SPONGE SANDING ANGLED MED PPR SND SUPR CNTR 280GRT SPONGE SNDG DUAL ANGLE 80GRT
Offered in various styles and grits for sanding of paint and drywall. Task Eco Sanding Pad, 220 Grit, Grit Grade: Very Fine, Foam Backing, 5-1/2 in L, 4-1/2 in W, 3/16 in Thick Our super sharp abrasive and new coating method make these sponges resist clogging, cut faster and last longer than general sanding sponges and up to 5X longer than conventional and paper. The various sizes and grit combinations offer maximum versatility and flexibility for sanding curved, contoured or flat surfaces of wood, metal, paint, plastic and drywall.