|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic shim is ideal for leveling cabinets, furniture or appliances on uneven floors or surfaces. Textured, non-marring plastic.
|
Mini clear snow guards are manufactured in a high clarity polycarbonate plastic with UV stabilizers which provide strength and longevity. These are designed to fit between the stiffening ribs of residential metal roof panels. They have a low visibility and blend with roof materials. They can be attached with adhesives, screws or a combination of both.
|
Oatey? rain collar for No-Calk? roof flashings can be used as a secondary seal for commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey? rain collar for No-Calk? roof flashings can be used as a secondary seal for commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe.
|
Oatey? rain collar for No-Calk? roof flashings can be used as a secondary seal for commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe.
|
Oatey? created the plumbing vent flashing industry nearly 100 years ago. Today Oatey flashings are used in commercial and residential applications where a water-tight seal around plumbing vent pipe or outside wall penetrations is required. Flashings are available in a variety of thermoplastic, aluminum, galvanized and copper materials. All Oatey flashings are rated for a minimum of 82 deg C continuous heat and approved for Type B installations.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Clear snow guards are manufactured in a high clarity polycarbonate plastic with UV stabilizers which provide strength and longevity. The structural rib guard is designed to fit over stiffening rib on residential panels. The surface mount are particularly effective in retaining snow and ice on metal roofs where there are no suitable seams to which a seam mounted device can be fastened, including batten and cap seam panels. Both have a low visibility and blend with roof materials and can be attached with adhesives, screws or a combination of both.
|
Designed for easy snapping and faster installations. NWS Composite shims are waterproof, resist splitting, impervious to insects and offer much greater load bearing capacity than wood. Composite Shims are 8 in long and tapered from 5/16 in down to 1/32 in. There are 32 shims per carton, 15 cartons per box and 50 boxes per pallet. Shims fit easily into a tool belt.
|
Oatey? created the plumbing vent flashing industry nearly 100 years ago. Today Oatey flashings are used in commercial and residential applications where a water-tight seal around plumbing vent pipe or outside wall penetrations is required. Flashings are available in a variety of thermoplastic, aluminum, galvanized and copper materials. All Oatey flashings are rated for a minimum of 82 deg C continuous heat and approved for Type B installations.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These shims are easy to cut and have an excellent snap. Shims are 8 in long and tapered from 5/16 in down to 1/32 in. 56 shims per job pack, 10 job packs per master display box and 12 master display boxes per pallet. Shims fit easily into a tool belt.
|
Oatey? created the plumbing vent flashing industry nearly 100 years ago. Today Oatey flashings are used in commercial and residential applications where a water-tight seal around plumbing vent pipe or outside wall penetrations is required. Flashings are available in a variety of thermoplastic, aluminum, galvanized and copper materials. All Oatey flashings are rated for a minimum of 82 deg C continuous heat and approved for Type B installations.
|
Oatey? created the plumbing vent flashing industry nearly 100 years ago. Today Oatey flashings are used in commercial and residential applications where a water-tight seal around plumbing vent pipe or outside wall penetrations is required. Flashings are available in a variety of thermoplastic, aluminum, galvanized and copper materials. All Oatey flashings are rated for a minimum of 82 deg C continuous heat and approved for Type B installations.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey? created the plumbing vent flashing industry nearly 100 years ago. Today Oatey flashings are used in commercial and residential applications where a water-tight seal around plumbing vent pipe or outside wall penetrations is required. Flashings are available in a variety of thermoplastic, aluminum, galvanized and copper materials. All Oatey flashings are rated for a minimum of 82 deg C continuous heat and approved for Type B installations.
|
Oatey? created the plumbing vent flashing industry nearly 100 years ago. Today Oatey flashings are used in commercial and residential applications where a water-tight seal around plumbing vent pipe or outside wall penetrations is required. Flashings are available in a variety of thermoplastic, aluminum, galvanized and copper materials. All Oatey flashings are rated for a minimum of 82 deg C continuous heat and approved for Type B installations.
|
Oatey? created the plumbing vent flashing industry nearly 100 years ago. Today Oatey flashings are used in commercial and residential applications where a water-tight seal around plumbing vent pipe or outside wall penetrations is required. Flashings are available in a variety of thermoplastic, aluminum, galvanized and copper materials. All Oatey flashings are rated for a minimum of 82 deg C continuous heat and approved for Type B installations.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
H2O PRIMER is a polymer emulsion-based primer designed to improve the adhesion of Resisto self-adhesive elastomer SBS modified bitumen waterproofing membranes on most substrates. It is particularly recommended when the use of solvent-based primer is not advised (indoor installation and on polystyrene insulation).
|
Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
|
MULTIPURPOSE ALUMINUM?MEMBRANE Aluminum Purpose is a self-adhesive membrane 1.0mm (40mil) thick composed an elastomeric bitumen. the upper face of the membrane (exposed portion) is covered with an aluminum foil. The lower face of the membrane (side self adhesive) is covered with a silicone film easily detachable. Multipurpose aluminum membrane is designed for sealing of odd jobs maintenance and repair.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Oatey Aluminum No-Calk? roof flashings are manufactured with an 18 x 18 in rustproof stamped aluminum base for commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe.
|
Oatey? All-Flash No-Calk? roof flashings are manufactured with aluminum bases and a patented design that allows use on multiple pipe sizes in commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe.
|
Duraflo Base Pipe Flashing, Pipe Size: 3 in, Thermoplastic, Brown, 16-1/4 in OAL, 16-1/4 in OAW, Includes: (12) Roof Flashings
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Installed over a 2 in plumbing vent stack to seal the roof penetration. Press fit application, no sealant needed. The flashing will be secured to the roof and shingled around as part of the roofing application. Flexible plastic base.
|
Installed over a 4 in plumbing vent stack to seal the roof penetration. Press fit application, no sealant needed. The flashing will be secured to the roof and shingled around as part of the roofing application. Flexible plastic base.
|
Installed over a 3 in plumbing vent stack to seal the roof penetration. Press fit application, no sealant needed. The flashing will be secured to the roof and shingled around as part of the roofing application. Rigid plastic base.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Installed over a 4 in plumbing vent stack to seal the roof penetration. Press fit application, no sealant needed. The flashing will be secured to the roof and shingled around as part of the roofing application. Rigid plastic base.
|
Oatey? created the plumbing vent flashing industry nearly 100 years ago. Today Oatey flashings are used in commercial and residential applications where a water-tight seal around plumbing vent pipe or outside wall penetrations is required. Flashings are available in a variety of thermoplastic, aluminum, galvanized and copper materials. All Oatey flashings are rated for a minimum of 82 deg C continuous heat and approved for Type B installations.
|
Oatey?? High-Rise?? thermoplastic All-Flash?? No-Calk?? roof flashings feature a patented design that allows use on multiple pipe sizes in commercial and residential applications that require a watertight seal for roof penetrations around the plumbing vent pipe.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Installed over a 3 in plumbing vent stack to seal the roof penetration. Press fit application, no sealant needed. The flashing will be secured to the roof and shingled around as part of the roofing application. Rigid plastic base.
|
Used as a moisture barrier when 2 opposing slopes of a roof come together to form a valley.
|
Rubber based spray adhesive designed to enhance the adhesion of "Blueskin" membranes. Quick setting. Aggressive tack provides adhesion of membrane. Suitable for application at normal and low temperatures. Clear amber color. -10 to 104 deg F application temperature. 3-minute drying time for initial set. 20 min drying time for set through. Spray can application eliminates the need for brushes or rollers. 30 to 50 sq-ft per can coverage depending on porosity and texture of surface. 15 oz. Can.
|
|
|
Get a Quote
