|
|
|
|
|
|
|
|
|
|
|
|
|
|
With bolt, nut and washer. Pack loose.
|
Designed so that tightening the lag screw draws the bracket tightly around the track and holds the bracket firmly in place.
|
National Hardware Door Pull, Projection Size: 1.82 in, Plate Size: 0.1 in, 1.38 in W, 1.82 in D, 6-3/4 in H, Steel, Zinc, Fastener Type: Screw, Includes: (4) Pan Head Wood Screws
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel.
|
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel.
|
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
With its minimalist appearance and sleek design, this open bar holder is an excellent security solution. Ideal for added security on barns, sheds and warehouse doors. Simple installation.
|
A sturdy and reliable choice for general construction. Ideal for use on sheds, barns or gates. Quick and easy installation.
|
Used to reinforce doorways against forced entry by providing secure placement of 2 x 4 in lumber against entry side of door. 2 x 4 in must be slid through the bar holders. Clearance for 1/4 in bolts. Manufactured from hot rolled steel.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This product is designed so that tightening the lag screw secures the bracket around the track and holds it firmly in place.
|
Onward Box Rail Joint Connector, Single, Specifications: 450 lb, Steel, Zinc, Dimensions: 2-1/4 in L x 1-3/4 in W x 3-1/4 in H, Suitable for: 1-1/2 to 3-1/2 in Thick Doors
|
With its minimalist appearance and sleek design, this closed bar holder is an excellent security solution. Ideal for added security on barns, sheds and warehouse doors. Simple installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
National Hardware Door Pull, Projection Size: 1.82 in, Plate Size: 0.1 in, 1.38 in W, 1.82 in D, 6-3/4 in H, Black, Steel, Fastener Type: Screw, Includes: (4) Pan Head Wood Screws
|
Designed to join two rails, end to end and holds it in place with the screw included. Wall mounting is designed so that tightening the lag screw draws the bracket tightly around the track and holds the bracket firmly in place.
|
Onward Stay Roller, Roller Diameter: 2 in, Plastic/Steel, Zinc, Screw Mounting, Dimensions: 4-1/2 in L x 1-7/8 in W x 3-1/2 in H, Suitable for: 1-1/2 to 2-1/2 in Thick Doors, Includes: Flat Head Wood Screw
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for use as a door stop on up to 2 in thick sliding doors. Embossed steel for added strength. Display packed.
|
Onward Box Rail Bracket, Single, Steel, Zinc, Dimensions: 4-1/2 in L x 1-3/4 in W x 3 in H
|
This product is designed so that tightening the lag screw secures the bracket tightly around the track and holds the bracket firmly in place.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The cam action combined with the adjustable hook firmly holds the door against the jamb.
|
Onward Low Box Rail Bracket, Single, Galvanized Steel, Dimensions: 4-7/8 in L x 1-3/4 in W x 3-1/2 in H, Includes: Screws
|
Designed to support double run of #5114 or #5116 box rail. Suitable for use on corrugated metal siding due to narrow surface. Does not come with rail bracket or fasteners. Can be used as double stop when used with #6008 door stop. 300 lb. Safe working load.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed as a support bracket for Stanley's 105270, 105676, 105213 and 105726 box rail at 24 in OC intervals. Includes lags. Display packed.
|
Onward Dual Axis Box Rail Hanger, 450 lb Weight, Roller Width: 8.13 mm, Roller Diameter: 55.88 mm, Steel, Zinc, Screw Mounting, Dimensions: 4-1/2 in W x 1-9/16 in H, Includes: Bushing Rollers, Fixed Short Threaded Mounting Pin
|
National Hardware Door Pull, Projection Size: 1.82 in, Plate Size: 0.1 in, 1.38 in W, 1.82 in D, 6-3/4 in H, White, Steel, Vinyl-Coated, Fastener Type: Screw, Includes: (4) Pan Head Wood Screws
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Onward Adjustable Stay Roller, Number of Rollers: 1, Zinc, Dimensions: 5-1/2 in L x 3-15/16 in W x 4 in H, Suitable for: 1-1/2 to 3-1/2 in THK Aluminum, Metal Frame, Wood Sliding Doors
|
Adjustable wall mount bracket for box track rails. Ideal for use on metal-sided or corrugated siding.
|
Onward Double Axle Box Rail Hanger, 450 lb Weight, Bearing Type: Ball, Roller Width: 8.13 mm, Roller Diameter: 55.88 mm, Steel, Zinc, Screw Mounting, Dimensions: 4-1/2 in W x 1-9/16 in H, Includes: Ball Bearings, Short Threaded Fixed Mounting Pin
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Without screws. Each loose.
|
Designed to be used with #5400 round rail to join and hold two lengths of rail together. Includes lag bolt and spice screws. Splice screws are inserted in holes at the end of round rail. Safe working load 300 lb.
|
Onward Dual Axis Box Rail Hanger, 450 lb Weight, Number of Rollers: 2, Bearing Type: Ball, Zinc, Dimensions: 4-1/2 in W x 1-9/16 in H, Suitable for: 2 in THK Wood Doors, Includes: Ball Bearings and Apron Mounting Hinge
|
|
|
Get a Quote
