|
|
|
|
|
|
|
|
|
|
|
|
|
|
Waterline Valve Elbow, Specifications: 3/4 x 3/4 in, Plastic, White
|
Waterline Heater Drain Tube, Specifications: 3/4 in MPT, Dimensions: 42 in L
|
GSW Element Gasket, Specifications: Square Flanged, Gray
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The CAMCO side mount run-off tube carries water steams safely to the drain pan or drain, if T and P valve activates. Thermoplastic polypropylene run-off tubes present a rigid surface for gripping with standard wrenches and can be cut to length.
|
CAMCO 11523 3/4 in plastic water heater drain valve features an all plastic valve that fits directly into water heater for easy draining. 3/4 in pipe thread x 3/4 in male hose thread.
|
GSW Heater Drain Valve, Plastic, White
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The 2-1/2 in dielectric nipple is designed for use in water heater inlet and outlet hook-ups and for other uses where dissimilar metals occur in piping and plumbing systems. The thermoplastic lining helps prevent corrosion and the ends are 3/4 in NPT tapered pipe thread for a fluid-tight seal. Dielectric nipple measures 2-1/2 in Length and is sold in a convenient 2-pack.
|
Oatey?? plastic water heater pans can be installed under electric water heaters to protect from water damage.
|
1-1/4 in shank length. Heavy brass construction. Neoprene seal disc. 3/4 in hose threaded outlet. Plated steel canopy handle. Pipe threads comply with ANSI B1.20.01. Hose threads comply with ANSI B1.20.7.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
GSW Element Wrench, Dimensions: 5 in L x 1-1/2 in Dia
|
Series N36 water service vacuum relief valves are used in water heater/tank applications to automatically allow air to enter into the piping system to prevent vacuum conditions that could siphon the water from the system and damage water heater/tank equipment. They have a brass body construction with NPT male inlet connection and a protective cap. Series N36 has a low profile design, is tested and rated to ANSI Z21.22 and is CSA certified. It is suitable for low pressure steam and water service and is ideal for use in domestic water heaters and supply tanks, table top heaters, jacketed steam kettles, unit heaters, low pressure steam systems and steam coil heaters.
|
Manufactured from semi-flexible, tough and durable plastic polymer. Will not rust or corrode. Pan comes with 1 1/2" PVC fitting. Pans are pre-drilled to accommodate fitting. Recommended for electric water heaters.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Prevents heat escape through the inlet and outlet when flow stops. Color coded cold inlet and hot outlet. Meets AGA requirements. Self-cleaning fittings prevent corrosion. Dielectric insert thermoplastic lining. 3/4 in MPT x 3/4 in MPT x 3 in L MIP.
|
High watt density elements, (150 plus W/sq-in). Gasket and detailed instructions included. Voltage rating of 240 V. UL listed.
|
WATTS Temperature and Pressure Relief Valve, Nominal Size: 3/4 in, NPT Connection, Operating Pressure: 125 psi, Body Material: Bronze
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For electric water heaters only. Heavy-duty polypropylene. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
Zinc-plated element wrenches fit all screw-in elements and 1-1/2 in nuts. Works with your screwdriver. Goes into offsets where an adjustable wrench can't.
|
Oatey?? plastic water heater pans can be installed under electric water heaters to protect from water damage.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cash Acme Pressure Relief Valve, Nominal Size: 3/4 in
|
High watt density elements, (150 plus W/sq-in). Gasket and detailed instructions included. Voltage rating of 240 V. UL listed.
|
GSW Screw-In Water Heater Dip Tube, Specifications: 3/4 in Size, NPT Connection, Polysulfone, Dimensions: 55 in L
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WATTS Temperature and Pressure Relief Valve, Nominal Size: 3/4 in, NPT Connection, Operating Pressure: 150 psi, Body Material: Bronze, Dimensions: 1-3/4 in L x 3-1/2 in W x 1-1/8 in H, Suitable for: Water Heaters up to 105,000 BTU/hr
|
Test your elements and thermostats while still in the water heater. 1 piece.
|
For electric water heaters only. Heavy-duty polypropylene. Dual size 1 to 1-1/2 in PVC drain fitting with gaskets included. Sides are 2-1/2 in deep. Pre-cut side opening for drain fitting.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RELIANCE WORLDWIDE NCLX Temperature and Pressure Relief Valve, Nominal Size: 3/4 in, MNPT x FNPT Connection, Operating Pressure: 150 psi, Actuator Type: Lever, Body Material: Bronze, Temperature Rating: 210 deg F
|
UL listed. Gasket included.
|
UL listed. Gasket included.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
UL listed. Gasket included.
|
UL listed. Gasket included.
|
UL listed. Gasket included. 208V 3500W or 240V 4500W
|
|
|
Get a Quote
