|
|
|
|
|
|
|
|
|
|
|
|
|
|
Simpson Strong-Tie Hurricane Tie, Steel, Galvanized, 6 in L, 1-3/8 in W, 18 ga, Fastening Method: Nail, Resists: Corrosion, Applicable Material: Wood
|
The NCA provides bracing between floor joists as a critical contribution to the structural strength of a floor. Installed in pairs, this nail less compression bridging keeps joists in place and prevents them from rotating while distributing loads over more than one joist. The NCA features precision-formed V-shaped prongs, in place of nails, to provide a secure grip before the drive-home blow for deeper prong penetration.
|
The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.
|
The LSTA is designed to resist tension loads in wood-to-wood applications. This light strap-tie utilizes a staggered nail pattern to help minimize wood splitting. The LSTA is designed for use on the edge of 2X members.
|
All hangers in this series have double-shear nailing. This innovation distributes the load through two points on each joist nail for greater strength. It also allows the use of fewer nails, faster installation and the use of standard nails for all connections.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the use of all common nails for the same connection.
|
The LS connector is a cost-effective method for connecting roof rafters to hip rafters. The durable design and fastening options of these load-rated skewable angles make them an ideal option compared to field-fabricated clip angles. The LS has well-defined fastener locations and testing ensures that the tabulated load values account for connection eccentricities.
|
The LSC adjustable stair-stringer connector offers a versatile, concealed connection between the stair-stringer and the carrying header or rim board while replacing costly framing. Field slopeable to all common stair-stringer pitches, the LSC connector is suitable for either solid or notched stringers.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The PSCL is designed to brace unsupported sheathing edges when sheathing meets edge to edge without a rafter for support. This light sheathing clip provides a 1/8 in gap to address shrinkage and expansion of roof sheathing. Inserted over the edges of adjacent plywood panels, the PSCL reduces deflection and keeps panels even to maintain a level plane on the structure.
|
Simpson Strong-Tie panel sheathing clips are used to brace unsupported sheathing edges and provide a 1/8 in gap to address shrinkage and expansion of roof sheathing.
|
Combine beautiful ornamental design with the flexibility of height and angle adjustments.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Made from standard tarred roof paper, this impermeable band prevents wood decay. Larger than the simple joist, it diverts water to each side. Offers maximum protection for your deck. Do not waste anymore energy or time cutting bands from a large roll of 48 in (for the roof). This band is installed in a wink - just unroll it on the roof structure and staple it.
|
The popular RCPS rebar carport saddle works as a cast-in-place or post-installed saddle for connecting posts to concrete. Now it has been redesigned with added features that offer greater installation flexibility and strength.
|
Made from standard tarred roof paper, this impermeable band prevents wood decay. Larger than the simple joist, it diverts water to each side. Offers maximum protection for your deck. Do not waste anymore energy or time cutting bands from a large roll of 48 in (for the roof). This band is installed in a wink - just unroll it on the roof structure and staple it.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The SU Series of hangers are skewed 45 deg left or right. Angled nail slots direct nails for proper installation.
|
Extends an adjustable Pylex screw to 24 more inches, to push it further into the ground. Its steel structure gives it the same resistance and durability as the Pylex foundation screws. A good solution in case of major freezing or insertion near foundations. Easy installation: Just insert the extension between the head and the rod of the adjustable screw. Baked powder coating finish provides excellent rust resistance. Is compatible with Pylex 32 in or adjustable Pylex screws 50 in. Offers long term protection since the wooden post is above ground level.
|
Simpson Strong-Tie Hanger, Skew Angle: 45 deg, Fastener Type: Nails, Steel, Galvanized, Face Mounting, 8-1/8 in H, 1-9/16 in W, 2 in D
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Hubbell Protector Plate, 3 in L, 1-1/2 in W
|
The TWB is designed to resist racking during construction. This T-shaped wall bracing features two rolled edges for extra strength and safety. The TWB is not designed to replace structural panel shearwall load-carrying components.
|
Combine beautiful ornamental design with the flexibility of height and angle adjustments.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
These screws are designed expressly to securely screw the deck track. Its numerous close threads ensure solidity and durability. They can be installed without drilling a hole.
|
Easy-to-install and made for both indoor and outdoor use.
|
Pylex Ground Ecospike, Square, Black, Suitable for: 4 x 4 in Square Post
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Simpson Strong-Tie panel sheathing clips are used to brace unsupported sheathing edges and provide a 1/8 in gap to address shrinkage and expansion of roof sheathing.
|
Easy-to-install and made for both indoor and outdoor use.
|
The PSCL is designed to brace unsupported sheathing edges when sheathing meets edge to edge without a rafter for support. This light sheathing clip provides a 1/8 in gap to address shrinkage and expansion of roof sheathing. Inserted over the edges of adjacent plywood panels, the PSCL reduces deflection and keeps panels even to maintain a level plane on the structure.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Simpson Strong-Tie panel sheathing clips are used to brace unsupported sheathing edges and provide a 1/8 in gap to address shrinkage and expansion of roof sheathing.
|
This repair kit provides you with everything necessary to repair a broken fence post at the ground level. A cheap, practical and clever solution which extends the life of a post without having to remove it from the ground. Easy to install, insert the plates on the sides of the post so as to reinforce it, then attach them with screws. Its steel structure covered in baked powder coating ensures durability.
|
The PSCL is designed to brace unsupported sheathing edges when sheathing meets edge to edge without a rafter for support. This light sheathing clip provides a 1/8 in gap to address shrinkage and expansion of roof sheathing. Inserted over the edges of adjacent plywood panels, the PSCL reduces deflection and keeps panels even to maintain a level plane on the structure.
|
|
|
Get a Quote
